Sidebar

Ranging from your friendly neighbourhood grocery stores to an international brand store, Barcode scanners are used in almost every business and store. It is an easy way of maintaining inventory and keeping a check on the sales. For us, the 12-digit code or black and white stripes printed on everything we buy might not be that important. But these codes and stripes are like an identification pattern for the products, it is how they are differentiated from similar products.

Without the help of barcode checkers, checking out from a boutique or a shopping mall will get a whole lot difficult. And if these checkers run out of battery, imagine how much problematic it will be. This will result in lots of recorded losses, incorrect inventory management, and several unsatisfied customers. Also, insufficient care for the batteries can make them lose power more often.

You can always have better battery performance and power retention if you keep good care of your barcode scanner batteries. Batteries are not just a compact power source; they help us out in our everyday chores. Therefore, it is advised to maintain battery care to ensure that they stay in good condition for long.

By following best and recommended practices and measures, you can have prolonged battery life and an extended scanner life as well. The battery care starts from its proper setup and regular charging to its correct disposal. There are numerous do's and don'ts in the barcode scanner battery maintenance, and users have to follow all of them.

Let’s start with uses of barcode scanner batteries:

Scanner Battery Application

There are several businesses that were benefitted with the use of barcode scanners; there are multiple retail operations that are completed with these tools. Barcode scanners are used for a wide variety of industrial functions, from preventing shrinkage from keeping a check on the inventory.

It is important equipment in almost every retail-related business. This makes us strongly support the fact that barcode scanner batteries are equally important, without them these handy tools won’t work.

Here are 4 examples of how barcode scanners and batteries can leave a large impact on retail functioning:

  1. Data management
  2. Inventory control
  3. Warehousing
  4. Warehousing

How to get the best battery performance?

Battery maintenance will help you save a lot of bucks spent on your equipment. These will also provide strong support to your functioning after all expenses. Here are a few ways to start with battery care:

  • Exhausted battery overuse is one of the top reasons why portable barcode scanners fail to perform. 
  • To ensure that your barcode scanner batteries last for full shifts, you must substitute the batteries with their replacements once the battery capacity goes below 70%-60%.
  • You can save a lot of money, time, and effort if you follow proper battery maintenance procedures.

You can save a lot of money, time, and effort if you follow proper battery maintenance procedures.

How much downtime can a battery survive?

Batteries with declining power are one of the top causes of slowed-down or delayed retail functioning. People and operators lose a lot of money and time in repairing or replacing the batteries with new ones.

You must replace the batteries or get them to the station for recharging, and if this happens at the peak-hour- it can cause a serious loss for the company. Having a properly charged battery will ensure that your scanner is performing at its best.

If you want to know when it is the best time to replace the battery with a new one, you must check:

  • Has the battery been in use for more than 18 months?
  • Does a complete charge battery last less than 8 hours?
  • Is it unable to hold a 100% charge?

When you notice the situations in this checklist coming to life in your battery use, then maybe it is time to reconsider and get a fresh battery. It will help you save time and money.

How to get maximum service from the Barcode Scanner Batteries?

For getting the maximum from your battery’s life, follow these useful tips:

  • Put a label on the barcode scanner batteries. This will help you in placing the correct battery on charge, and not mix them up.
  • Make sure that you replace the battery as soon as possible after you get the low-battery alert. Always carry a fully charged battery pack with you.
  • Keep an eye out for any kind of cracks or leaks in the battery. Any sign of damage and inflammation and the battery should be disposed of and substituted.
  • Damaged batteries can be harmful to anyone in proximity as they are made up of flammable liquids. Therefore, avoid using such batteries.
  • If you use these batteries 24*7 or have a packed shift with barcode scanners, then replace the battery every year.
  • You can try and clean the battery contacts with an eraser, at regular intervals. This will ensure proper charging.

Future of Barcode Scanner Batteries

In the upcoming years, it is expected that scanner batteries will undergo a revolutionary upgrade. They will become safer to use, charge faster, and will get more compact and lightweight. Yes, barcode scanner batteries won’t be the first one to go through this change. But it is expected that based on their chemical composition, more scanner batteries will be introduced. Few of these will be:

  • Prieto Batteries
  • Graphene batteries
  • Solid-state batteries
  • Na-Ion batteries

Conclusion

Barcode scanners are like life-savers for many industries. They are very useful in tackling multiple retail and inventory management tasks. To ensure that your scanner lasts as long as you shift, you must have a durable and well-maintained barcode scanner battery. Most scanners come with a battery in a set, but you must keep in an original battery replacement with you at all times. By following correct steps for battery care and maintenance, you can ensure that your barcode scanner batteries last long and perform equally well.



0 comments

Leave a comment

Please note, comments must be approved before they are published